When it comes to Extruder Drive and Control Upgrades, you will soon be blinded by our light. Our TEMPCOM Extruder Control Systems are derived from a fully developed source code that has been tested and proven time and time again. From the simplicity of a mono line to a five-layer line, the scalability of our solution will easily fit your needs. Ask for a Demo, we would love to show you what others cannot do! Dig?
Our design was built around several key principles:
1. It must be easy for a new operator to use
2. Stop operators from damaging equipment
3. Immediately and specifically identify problems
4. Provide process data for better production
Operation is made easy with intuitive colors. If its too hot, the numbers are red, too cold they are blue, and if just right they are green! Warnings are yellow, and fatal alarms red! Arrows for heating are red and cooling blue! Simple and easy to understand, even for a new user. Can you dig it?
Don't train new employees on what "NOT" to do, just don't let them do it, pretty simple, huh!? Our systems limit potential disasters by not letting a new user change recipes or start the system up in zones that are off or too cold! Don't let them do it, because you know they will try and Freak Out or be Trippin'!
You heard that right! PREVENTATIVE Diagnostics! These are not the notifications telling you the system has Bummed Out, no sir! These notifications are designed to tell you that you have trouble coming, BEFORE trouble comes! We let you know things like...your drive is getting too hot, so is your motor, better check your enclosure, check your gearbox oil too, your drive is in need of repair, and your screw life is reaching it last few turns...all before your line Freaks Out and fails!
The majority of maintenance downtime is associated with trying to figure out why a system has stopped working properly, but our system tells you exactly what, where and why the problem occurred in plain language. Along with visualized I/O status for troubleshooting hardware, we can even connect to your system and help
PLC's don't remember much, because they can't, but our system remembers everything and makes it all easily accessible. Access process data through SQL, Filezilla or even a FLASHdrive...no matter how, we got what you need! Quit operating in the dark and partner with someone that has a FLASH LIGHT...SPOT LIGHT...NEON LIGHT!
We ship all of our systems securely within wooden shipping crates adding a shock sensor to visually indicate if potential shipping mishandling applies. Our systems are shipped FOB Coppell, TX, for your protection, we ask you be sure to look for the label! Dig?
Integrated Control Technologies
440 Wrangler Drive, ste 100 Coppell, Texas 75019, United States
(972) 906-7445 "Rikki, Don't Lose That Number"
Copyright © 2024 Integrated Control Technologies - All Rights Reserved.
Powered by GoDaddy
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.